Product catalogue
Choose a category and compare models by their technical values.
Tillage
KP-430 Mouldboard Plough
Three-furrow mounted plough with shear-bolt protection for 65–90 HP tractors, ploughing 20–30 cm deep.
KP-545 Reversible Mouldboard Plough
Five-furrow reversible plough with hydraulic stone reset for 140–190 HP tractors and heavy soils.
DK-28 Trailed Disc Harrow
Trailed 28-disc harrow with hydraulic transport wheels, 3.4 m wide, for stubble and seedbed work.
RT-250 Rotary Tiller
PTO-driven 2.5 m rotary tiller with gear side drive for a fine seedbed in one pass.
KV-300 Spring Tine Cultivator
Mounted 3 m cultivator with 13 S-tines for weed control and secondary tillage.
DP-3 Subsoiler
Three-leg subsoiler working 40–60 cm deep to break plough pans and improve drainage.
Seeding
HM-30 Grain Seed Drill
Mechanical 24-row grain drill with fertiliser compartment, 3 m wide, for wheat, barley and forage crops.
HM-40D Pneumatic Seed Drill
Trailed 32-row pneumatic drill with double-disc coulters and a 2,800 L hopper, 4 m wide.
PE-6 Pneumatic Precision Planter
Six-row vacuum precision planter for maize, sunflower, cotton and beet with singulated seeding.
PE-8K Folding Precision Planter
Eight-row folding precision planter with electric row drives and section shut-off.
Crop protection
TP-800 Mounted Field Sprayer
Mounted sprayer with an 800 L tank and 12 m manual-fold boom for small and mid-size farms.
TP-3000 Trailed Field Sprayer
Trailed sprayer with a 3,000 L tank, 24 m hydraulic boom, rate control and steering drawbar.
BA-1000 Orchard Mist Blower
Trailed 1,000 L orchard sprayer with a two-speed fan for canopy penetration in orchards and vineyards.
Fertilising
GS-1200 Mounted Fertiliser Spreader
Mounted twin-disc spreader with a 1,200 L hopper, stainless discs and an 18 m spread width.
GS-3500 Trailed Weighing Spreader
Trailed 3,500 L spreader with weighing hopper and speed-related rate control, 28 m spread.
HT-8 Manure Spreader
Manure spreader with an 8 m³ body, vertical beaters, chain floor and hydraulic door.
Hay and baling
ÇB-300 Disc Mower
Mounted seven-disc mower with an oil-bath cutterbar, 3 m cutting width for lucerne and grass.
TR-660 Twin-Rotor Rake
Twin-rotor centre-delivery rake with 6.6 m working width and hydraulic folding.
KB-120 Small Square Baler
Small square baler with double knotters producing 36×46 cm bales of hay and straw.
YB-150 Variable Chamber Round Baler
Variable chamber round baler making 120–150 cm bales with net and twine wrapping.
Silage
SM-1 Single-Row Forage Harvester
Single-row mounted forage harvester with 12 knives and 6–18 mm chop length.
SM-3 Row-Independent Forage Harvester
Row-independent 2.25 m forage harvester with kernel processor and 4–22 mm chop length.
SK-200 Bale Wrapper
Turntable bale wrapper with automatic film cutting for airtight round-bale silage.
Harvest and post-harvest
PS-2 Two-Row Potato Digger
Two-row potato digger with two-stage web, leaving tubers in a side row.
SS-150 Onion Lifter
Onion lifter with a 1.5 m flat share and single web, leaving bulbs on the surface to cure.
SP-280 Stalk Shredder
Flail stalk shredder with Y-blades, 2.8 m wide, for maize, cotton and sunflower residue.
Trailers and transport
RM-6 Three-Way Tipping Trailer
Single-axle 6 t three-way tipping trailer with hydraulic brakes and road lighting.
RM-12 Tandem-Axle Tipping Trailer
Tandem-axle 12 t rear tipping trailer with air brakes and telescopic ram for harvest haulage.
BP-8 Bale Transport Trailer
Tandem-axle 8 m flatbed bale trailer with 10 t payload and front and rear ladders.
ST-5000 Water Bowser
Galvanised 5,000 L water bowser with a self-priming pump and baffles.
